Parts & Accessories
- QR Locking Hitch Pin for Adams Trail-A-Bikes
- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond
• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims
This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.
Burley's Travoy Tie Down Straps help you secure your cargo to your Burley Travoy trailer (sold separately). These straps, sold in pairs, can replace the straps that come standard with the Travoy trailer or they can be used for added stability.
Elastic net with adjustable hooks designed to fit Burley frame tubes. Quickly secures loose cargo and frequently accessed items. Especially useful with Burley Coho XC and Flatbed bike trailers. - Hooks fit Burley frame tubes - Hooks can attach to net at various points allowing flexibility in attachment
$25.00 - $110.00
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
This Travoy hitch from Burley connects your Travoy trailer (sold separately) to your bicycle seatpost. Replace a lost hitch or get one for each bike in your quiver for convenience.
Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
Keep your little one warm so your routine doesn't change when the weather does. • Super soft interior is plush next to your child’s skin. • Compatible with most 5-pt harness systems and systems that include a lap belt. • Velcro backing for a perfect fit with all Burley trailers and strollers. • Recommended for children ages newborn to 2-years old. • Machine-washable.
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Take your furry friend all over town with the Tail Wagon Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. - Tool-free installation - Stroller wheels push easily - Compact footprint for maneuverability in tight spaces - Compatible with 2008 – current Tail Wagon models
Take your Burley Solstice anywhere and keep it protected with this Rolling Travel Case. It stands upright and has multiple handles for easy carrying. -Includes wheel bags to protect the fabric of the stroller. -Stands upright when stroller is inside. -Handles on the top and side for multiple carrying options. -Rolls up for compact storage.
Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.
The Transit Backpack is a convertible backpack with enough space for the workday or weekend adventures. Organizational pockets keep everything in place while the large main compartment zips open for more than enough room for a change of clothes, footwear, and the day’s fuel. Transport your gear with the backpack straps, side carry handle, or easily mount to the Travoy lower deck for a bike cargo trailer experience. Features: - 28-liter main compartment with full zip opening for easy access of ample storage - Water-resistant fabric with a tarpaulin bottom for additional protection - Dedicated padded laptop compartment (up to 15.6") for safe and secure storage - Stowable shoulder straps with sternum strap tuck away when not in use - Stowable bag clips (4) for Travoy bike trailer connection - Side zip pocket is readily accessible for quick stops - Mesh side pocket for water bottle - Breathable back panel - Fleece-lined exterior zip pocket for quickly accessing smaller items - Front organization pocket including utility clip for keys keeps everything in its place - Interior zip pockets for smaller items - Top and side carry handles for easy grab and go - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 28 - Weight (lbs/kg): 2.18 / 0.99
Replacement bicycle trailer hitch for Model A & Model T Bicycle Trailers - Compatible with Model T Bicycle Trailer
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Trailer Parts
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
A skewer for your Surly Trailer.
Surly Trailer Parts
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
Page 1 of 2 Next page