Lubes/Cleaners

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

Ceramic WET is Finish Line’s most advanced and most effective racing lubricant. This wet-style full synthetic lubricant is enhanced with a nano-sized platelets of boron nitride and micron particles of fluoropolymer that build a ceramic coating on the frictional surfaces of parts. Ceramic WET’s extreme durability, amazing smoothness and ultimate quietness ensures maximum drivetrain efficiency. Ceramic WET can be used in all disciplines: Mountain bike, cyclo-cross, road and track racing.

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

High performance suspension fluid formulated to provide fade-free performance. Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.

10 Weight Green Damper Fluid For rebuild and repair of Fox suspension. - 10 weight, 32oz bottle

5 Weight Damper Fluid For rebuild and repair of Fox suspension.

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

Designed to suit the maintenance of CeramicSpeed Bearings, the CeramicSpeed All Round Grease maximizes your bearings' lifetime and performance. This type of grease is a low-to-medium viscosity lubricant and works as the best compromise between friction influence and lifetime. We recommend it for optimal use in dry and sunny weather conditions, where no or very little contamination threatens the bearing. The application covers mostly road riding conditions; however, it can be used off-road in the same weather settings, on all types of CeramicSpeed Bearings. When lubricating your bearings, we recommend a fill rate of 60-80%. - The CeramicSpeed All Round Grease comes in a 10ml syringe - For use in CeramicSpeed Wheel Bearings and Bottom Bracket Bearings - Can be used for added durability in pulley wheels when used in adverse weather conditions - 5,000-10,000km or 3,000-5,000 mile average lifespan in clean conditions - 1,000-3,000km or 600-1,800 mile average lifespan in wet and harsh conditions

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air