Write a Review

Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. - Forged aluminum construction - Mounts to most frame or fork mounting holes - Great for tricky cantilever brake setups - Lightweight design - Front for fork mount / Rear for frame mount

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Extend housing runs using these double-ended junction end caps.

Jagwire 4/5mm Wedge Type Housing or Hose Guide Bag of 50

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Cables Are Pre-Stretched & Polished Smooth To A 1.1mm Diameter Finish - Comes With 15000mm & 2100mm Cable Lengths For Both Front & Rear Derailleurs - 2800mm Of Black 4mm Cable Housing - 6 Sets Of Donuts - 9 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps - Rubber Shielding

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables

- Cables Are Pre-Stretched & Polished Smooth To A 1.5mm Diameter Finish - Available In Both Stainless & Galvanized Steel - Comes With 1350mm & 2350mm Cable Lengths For Both Front & Rear Brakes - 3000mm Of Black 5mm Cable Housing - 3 Sets Of Donuts - 6 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps

- Sold in pairs. - Allen wrench included.

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables

- Cables Are Pre-Stretched & Polished Smooth To A 1.5mm Diameter Finish - Available In Both Stainless & Galvanized Steel - Comes With 1350mm & 2350mm Cable Lengths For Both Front & Rear Brakes - 3000mm Of Black 5mm Cable Housing - 3 Sets Of Donuts - 6 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

- Dispensers of alloy cable tips

- Dispenser of chromed ferrules - 5mm

SRAM's SlickWire XL Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent 1.6mm coated cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.

SRAM's SlickWire Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules and frame protectors. - Weight: 99 grams (pair)

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.